PreSonus StudioLive 24.4.2 - Manual (Page 49)

3 Universal Control and VSL
3.8 Smaart System Check Wizards (StudioLive 16.4.2 and 24.4.2 only)
StudioLive ™ Software Library
Reference Manual
45
5. To mute the pink noise at any time, simply click on the Speaker Icon.
6. Click OK when the pink noise is at the appropriate level.
7. Click Analyze to generate the frequency-response trace.
8. Adjust the EQ to shape the frequency-response into the correct Trend for your
application. (See Sections 3.8.6 and 3.8.7 for best practices.) In general, you do
not want to boost any frequencies and you do not want to make any cuts greater
than 6 dB. The frequency-response trace will refresh as you make your changes.
9. Click Exit to complete the wizard.
Advanced Analysis
1. Place your microphone on-axis in front of the speaker you
want to analyze. If you are analyzing a stereo bus, place your
microphone on-axis in front of the Left speaker. See Section
3.8.5 for tips in choosing the best primary mic position.
2. Select Advanced Analysis from the pull-down menu.
1