PreSonus StudioLive 24.4.2 - Manual (Page 29)

3 Universal Control and VSL
3.3 VSL: Overview Tab
StudioLive ™ Software Library
Reference Manual
25
3.3 VSL: Overview Tab
At the top of the VSL window, you will see four tabs: Overview, Fat Channel,
GEQ, and Setup. The Overview tab provides you with a complete graphical
representation of your StudioLive. As you adjust parameters on the StudioLive,
you will notice that the VSL overview is also updated. If you use your mouse
to adjust a parameter in VSL, the StudioLive will be updated remotely. It is
important to remember that every button, knob, slider, and fader on the VSL
corresponds directly to a button, knob, slider, or fader on your StudioLive.
The graphic above identifies each controller, labeled with its
corresponding control on the StudioLive, and can be used as a
map to quickly learn how to navigate the Overview tab.
3.3.1 Aux Send/Masters Views
VSL provides two views for your StudioLive aux outputs and FX buses. The Aux Send
view gives you an overview of the send levels of every channel on your StudioLive to
every aux output and FX bus.
Clicking on the arrow button will collapse the auxes, allowing you to view channel
faders and the microviews at the same time on lower-resolution screens.
Power User Tip: To quickly set up an aux mix, use your mouse to set
the send level for Channel 1. Right-click on the Channel 1 send level
and sweep your mouse across the other channel sends for that aux. The
send level will be copied to every other channel for that aux.
FireWire Return
Digital Out
Phantom Power
Phase Reverse
High Pass Filter
Subgroup Assign
Main Bus Assign
Gate Microview
Compressor Microview
EQ Microview
Aux Send Levels
FX Send Levels
Pan Control
Channel Select
Channel Solo
Channel Mute
Scribble Strip
Channel Level
Channel Meter
Stereo Link
Meter Mode
FX Type Menu
Focus GEQ
GEQ Assign
Focus GEQ
Enable GEQ
Display Browser
Talkback
Copy Mix