Burkert Type 8793 - Manual (Page 92)

92
Start-Up
25.2.5. P.CO-INIT – Smooth switchover MANUAL-AUTOMATIC
The smooth switchover between the MANUAL and AUTOMATIC states can be activated or deactivated in the
P.CO-INIT menu.
Factory default setting: bumpless Smooth switchover activated.
Operating structure:
ENTER
SELEC
EXIT
P.CO-INIT bumpless
standard
Smooth switchover activated
Smooth switchover deactivated
Figure 42: Operating structure P.CO-INIT
Procedure:
Key Action Description
/ Select P.CO-INIT
ENTER Press
The selection ( bumpless) and (standard) is displayed.
/ Select required function bumpless = smooth switchover activated
standard = smooth switchover deactivated
SELEC Press The selection is marked by a filled circle .
EXIT Press Return to SETUP.
Table 43: P.CO-INIT; smooth switchover MANUAL-AUTOMATIC
English
Type 8792, 8793