The history submenu – Burkert Type 8793 User Manual
Page 167

167
Auxiliary functions
26.2.22.7. History entries in the
HISTORY submenu
Each diagnosis function, which can output a message, has the
HISTORY submenu.
When the diagnosis message is actuated, a history entry is created with date and value. The history entries of the
respective diagnosis function can be viewed and deleted in the
HISTORY submenu.
A maximum of three history entries are stored from each diagnosis message. If three history entries are already
available when a message is actuated, the oldest history entry is deleted.
Example: History of the diagnosis function
TRAVEL.ACCU
EXIT
CLEAR
–––
TRAVEL.ACCU
01.02.12
01.02.12
01.02.12
5 cm
35 cm
10 cm
DATE
VALUE
Description:
On the left of the display is the date and on the right the associated
value.
Deleting the history:
Hold down the
CLEAR
key until the countdown (5...) is running.
The RESET.HISTORY diagnosis menu can be used to jointly delete the histories of all diagnosis func-
tions. See Chapter “26.2.22.5”.
Deleting.the.histories.of.a.diagnosis.function.in.the.example.TRAVEL.ACCU
Key
Action
Description
/
Select
TRAVEL.ACCU
ENTER
Press
The menu is displayed.
/
Select
HISTORY
INPUT
Press
History entries with date and value are displayed.
CLEAR
Hold down
as long as countdown (5 ...) is
running
The histories of the
TRAVEL.ACCU diagnosis function are deleted.
EXIT
Press
Return to the
TRAVEL.ACCU menu.
EXIT
Press
Return to the
DIAGNOSE main menu.
Table 94:
SERVICE.TIME; inputting interval for message.
CAUTION!
History entries are only created when the
CLOCK function for the display has been activated on the
process level.
To receive correct history entries, date and time must be correct.
Date and time must be reset after a restart. Therefore, the device switches immediately and automatically
to the corresponding input menu after a restart.
For activation and setting of
CLOCK see Chapter “17.4.1. Setting date and time:”
english
Type 8792, 8793