Burkert Type 8793 - Manual (Page 190)

190
PROFIBUS DP
28. DESCRIPTION OF THE PROFIBUS DP
28.1. Technical data
The protocol sequence complies with the standard DIN 19245 Part 3.
GSD.file BUER0C1E.gsd
Bitmap.files BUER0C1E.bmp
PNO-ID. 0C1E Hex
Baud.rate Max. 12 mbaud
(is automatically set by the Type 8792/8793)
Sync.and.Freeze.mode Are not supported
Diagnosis.telegram No device-specific diagnosis
Parameter.telegram No user parameters
The process data is configured in the Type 8792/8793 and in the PROFIBUS master.
Maximum 10 process values (total INPUT and OUTPUT) can be transferred.
28.2. Interfaces
Input for process
actual value*
4 – 20 mA
frequency
Pt 100
Binary input
24 V DC
Type.8792/8793
PROFIBUS DP
2 binary outputs
24 V PNP
Initiator 1 / Initiator 2
24 V PNP NO
Inputs Outputs
Supply
Operation
Note:
Optional inputs and outputs are illustrated by dotted lines
Bus Bus
* only for process controller Type 8793
Figure 116: Interfaces PROFIBUS DP
english
Type 8792, 8793