Burkert Type 8793 - Manual (Page 122)

122
Auxiliary functions
Setting.the.code.protection:
Key Action Description
MENU Press for approx. 3 s Switching from process level setting level.
/ Select SECURITY (To do this, the auxiliary function must be incorporated into the main
menu).
ENTER Press
The input screen for the access code ( Access Code) is displayed.
/ Select decimal place
Increase number
Enter code.
For the first setting:
Access Code 0000 (factory settings)
For activated code protection: Access Code from the user.*
OK Press
The submenu of SECURITY is opened.
/ Select CODE
INPUT Press
The input screen for specifying the access code ( Access Code) is
displayed.
/ Select decimal place
Increase number
Enter required access code.
OK Press Acknowledgment and return to the SECURITY menu.
/ select Selector operator actions to which the code protection is to apply.
SELEC Press Activate code protection by checking the box .
EXIT Press Acknowledgment and simultaneous return to the main menu
(MAIN).
EXIT Press Switching from setting level process level.
Table 55: SECURITY; setting code protection
The changed data is saved in the memory (EEPROM) only when there is a switch to the process level,
by leaving the main menu (MAIN) using the left selection key
EXIT . During the save process, the save
symbol is indicated on the display.
* If you have forgotten the set code:
All operator actions can be implemented with the non-changeable master code. This 4-digit master code
can be found in the printed brief instructions for Type 8792/8793.
english
Type 8792, 8793