Burkert Type 8793 User Manual
Page 162

162
Auxiliary functions
Display.TEMP.CHECK
Description.of.the.functions
EXIT
29-8-1
TEMP.CHECK
CURRENT
MAX
MIN
LIMIT
21.7 *C
21.7 *C
21.7.*C
CURRENT indicates the current temperature.
MAX indicates the highest temperature of the slave pointer
MIN indicates the lowest temperature of the slave pointer
The permitted temperature range can be changed in the
LIMIT submenu.
A message is output if the temperature goes outside the permitted range.
The temperature range has been preset at the factory from 0 ... 60 °C.
The history entries of the last 3 messages can be viewed and deleted in
the
HISTORY submenu.
EXIT
ENTER
29-8-1
LIMIT
HISTORY
Table 88:
TEMP.CHECK; temperature range
Operating structure:
ENTER
INPUT
INPUT
ENTER
OK
ESC
EXIT
CLEAR
Input
Limit
History entry is
displayed
Lowest temperature of the slave pointer
Highest temperature of the slave pointer
Display of the current temperature
TEMP.CHECK
TEMP.MAX
TEMP.MIN
LIMIT
HISTORY
Delete.history.entry
EXIT
MIN
MAX
CURRENT
CLEAR
CLEAR
Delete.value
Delete.value
EXIT
Figure 96:
Operating structure TEMP.CHECK
Specifying.temperature.limit.for.the.output.of.messages
Key
Action
Description
/
Select
TEMP.CHECK
(To do this, the
TEMP.CHECK function must be incorporated into
the
DIAGNOSE main menu. See Chapter “26.2.22.4. Activation of
ENTER
Press
The menu is displayed.
/
Select
LIMIT
ENTER
Press
The upper and lower temperature limit is displayed.
The upper limit
TEMP.MAX has already been selected.
INPUT
Press
Open input screen for upper temperature limit.
english
Type 8792, 8793