Aligning lever mechanism – Burkert Type 8793 User Manual
Page 42

42
Installation
Type 8792, 8793
english
Attaching.the.Type.8792/8793.with.mounting.bracket.for.actuators.with.columnar.yoke:
→
Attach mounting bracket to the columnar yoke with the U-bolt
⑦
, washers
⑪
, circlips
⑩
and hexagon nuts
21
Legend:
No.
Name
7
U-bolt
10
Circlip
11
Washer
21
Hexagon nut
21
10
11
7
Figure 18:
Attach Type 8792/8793 with mounting bracket; for actuators with columnar yoke
12.2.4. Aligning lever mechanism
The lever mechanism cannot be correctly aligned until the device has been connected electrically and
pneumatically.
→
Move the actuator in manual mode to half stroke (according to the scale on the actuator).
→
Adjust the height of the Type 8792/8793 until the lever is horizontal.
→
Fix the Type 8792/8793 in this position on the actuator.