Burkert Type 8793 - Manual (Page 39)

39
Installation
Type 8792, 8793
english
12.2.2. Installation
WARNING!
Risk.of.injury.from.improper.installation!
• Installation may be carried out by authorised technicians only and with the appropriate tools!
Risk.of.injury.from.unintentional.activation.of.the.system.and.an.uncontrolled.restart!
• Secure system from unintentional activation.
• Following assembly, ensure a controlled restart.
Procedure:
→
Using the clamping pieces
③
, hexagon bolts
⑰
and circlips
⑯
attach the hoop
②
to the actuator spindle.
Legend:
No. Name
2 Hoop
3 Clamping piece
16 Circlip
17 Hexagon bolt
3
17
2
16
Figure 13: Attaching the hoop
→
Select short or long lever according to the stroke of the actuator. (see “Table 10: Attachment kit for linear
actuators”).
→
Assemble lever (if not pre-assembled) (see “Figure 14”).