Burkert Type 8619 User Manual
Operating instructions type 8619 multicell
Table of contents
Document Outline
- C8619_multiCELL_EU_ML_3
- MA8619_multiCELL_EU_EN_3
- 1. About this manual
- 2. Intended use
- 3. Basic safety information
- 4. General information
- 5. Description
- 6. Technical data
- 6.1. Conditions of use
- 6.2. Compliance to standards and directives
- 6.3. General technical data
- 6.3.1. Mechanical data
- 6.3.2. Specifications of the "M0:MAIN" board
- 6.3.3. Specifications of the input board "Input"
- 6.3.4. Specifications of the additional outputs board "OUT"
- 6.3.5. Specifications of the memory card reader/recorder
- 6.3.6. Specifications of the "pH/redox" module
- 6.3.7. Specifications of the "COND" conductivity module
- 6.3.8. Specifications of the connection cables
- 7. Installation and wiring
- 8. Adjustment and commissioning
- 8.1. Safety instructions
- 8.2. Switching on the device for the first time
- 8.3. Using the navigation button and the dynamic keys
- 8.4. Entering some text
- 8.5. Entering a numerical value
- 8.6. Description of the icons
- 8.7. Operating levels
- 8.8. Process level
- 8.9. Configuration level access
- 8.10. Parameters menu
- 8.10.1. Setting the multiCELL date and time
- 8.10.2. Selecting the display language
- 8.10.3. Modifying the PARAMETERS menu access code
- 8.10.4. Consulting and/or activating the available software options
- 8.10.5. Saving the data on the memory card
- 8.10.6. Loading data from the memory card
- 8.10.7. Restoring the default parameters of the Process level and the outputs
- 8.10.8. Customising the "User views 1 to 4"
- 8.10.9. Renaming a process variable
- 8.10.10. Setting the display contrast and brightness
- 8.10.11. Configuring an arithmetic function
- 8.10.12. Configuring a "PROP" proportional function
- 8.10.13. Configuring an "ONOFF" control function
- 8.10.14. Configuring a PID (proportional integral drift) control function
- 8.10.15. Configuring a time dosing cycle
- 8.10.16. Configuring a "Volume Dosing" function
- 8.10.17. Configuring the "System switch" event
- 8.10.18. Datalogging (datalogger)
- 8.10.19. Choosing the units for the totalizers
- 8.10.20. Configuring the analogue inputs
- 8.10.21. Setting the parameters of the current outputs
- 8.10.22. Setting the parameters of the digital outputs
- 8.10.23. Setting the parameters of a pH/redox module
- 8.10.24. Setting the parameters of a conductivity module
- 8.11. Calibration menu
- 8.11.1. Activate/deactivate the Hold function
- 8.11.2. Modifying the Calibration menu access code
- 8.11.3. Adjusting the current outputs
- 8.11.4. Calibrating the analogue inputs
- 8.11.5. Restore the factory calibration of the analogue inputs
- 8.11.6. Resetting the totalizers
- 8.11.7. Entering the K factor for the used fitting or determining it using teach-in
- 8.11.8. Calibrating a pH or redox sensor
- 8.11.9. Calibrating a conductivity sensor
- 8.12. "Diagnostics" menu
- 8.12.1. Modifying the "Diagnostics" menu access code
- 8.12.2. Monitoring the current or voltage value received on the analogue inputs
- 8.12.3. Detecting an open loop on a voltage input
- 8.12.4. Monitoring the pH or redox values
- 8.12.5. Monitoring the conductivity of the fluid
- 8.12.6. Monitoring the temperature of the fluid
- 8.12.7. Reading the parameters of the pH, redox or conductivity sensor
- 8.13. Tests menu
- 8.14. Information menu
- 8.15. Structure of the configuring menus
- 8.16. Process inputs or values
- 9. Maintenance and troubleshooting
- 9.1. Safety instructions
- 9.2. Maintenance of the multiCELL
- 9.3. If you encounter problems
- 9.3.1. "Error" events related to the monitoring of process parameters (Right red LED and icons and  displayed)
- 9.3.2. "Error" events related to a problem with the device (Left red LED and icons and  displayed)
- 9.3.3. "Warning" events related to the monitoring of process parameters (Right orange LED and icons  and  displayed)
- 9.3.4. "Warning" events related to a problem with the device (Left orange LED and icons  and  displayed)
- 9.3.5. "Maintenance" events related to calibration (Right orange LED and icons ,  and  displayed)
- 9.3.6. Error messages during data saving
- 9.3.7. Error messages during data loading
- 9.3.8. Messages during datalogging (icon  displayed)
- 9.3.9. Miscellaneous messages
- 10. Spare parts and accessories
- 11. Packaging, transport
- 12. Storage
- 13. Disposal of the device
- RS_A4_hoch_Juni07