Burkert Type 8793 - Manual (Page 72)

72
Operation
19. ACTIVATING AND DEACTIVATING AUXILIARY
FUNCTIONS
Auxiliary functions can be activated for demanding control tasks.
The auxiliary function is activated via the ADD.FUNCTION basic function and transferred to the main
menu (MAIN).
The auxiliary functions can then be selected and set in the extended main menu (MAIN).
19.1.1. Activating auxiliary functions
Procedure:
Key Action Description
MENU Press for approx. 3 s Switching from process level setting level.
/ Select ADD.FUNCTION
ENTER Press
The possible auxiliary functions are displayed.
/ Select required auxiliary
function
ENTER Press The selected auxiliary function is now marked by a cross .
EXIT Press Acknowledgment and simultaneous return to the main menu (MAIN).
The marked function is now activated and incorporated into the
main menu.
The parameters can then be set as follows.
/ Select the auxiliary function In the main menu (MAIN) select the auxiliary function.
ENTER Press
Opening the submenu to input the parameters.
The setting of the submenu is described in the respective chapter of
the auxiliary function.
Return from the submenu and switch to the process level
EXIT *
ESC *
Press
Return to a higher level or to the main menu (MAIN).
EXIT Press Switching from setting level process level.
* The designation of the key depends on the selected auxiliary function.
Table 29: Activating auxiliary functions
English
Type 8792, 8793