Burkert Type 8793 - Manual (Page 132)

132
Auxiliary functions
• OUT.type.-.Setting.the.switching.status..
In addition to selecting the output, the switching status required for the binary output must be input.
See “Table 63”.
Key Action Description
/ Select OUT.type
SELEC Press
The switching statuses normally open and normally closed are
displayed.
/ Select switching status
SELEC Press The selection is marked by a filled circle .
EXIT Press Acknowledgment and simultaneous return to the OUT BIN 1/2 menu.
EXIT Press Acknowledgment and simultaneous return to the OUTPUT menu.
EXIT Press Acknowledgment and simultaneous return to the main menu (MAIN).
EXIT Press Switching from setting level process level.
Table 62: OUT.type; inputting switching status for binary output and return to the process level.
Switching.signal
Switching.statuses
normally.open normally.closed
0 0 V 24 V
1 24 V 0 V
Table 63: OUT BIN 1/2; switching statuses
The changed data is saved in the memory (EEPROM) only when there is a switch to the process level,
by leaving the main menu (MAIN) using the left selection key
EXIT . During the save process, the save
symbol is indicated on the display.
english
Type 8792, 8793