Burkert Type 8793 - Manual (Page 227)

227
DeviceNet
33.6.1. Setting up the process image (Mapping)
The AUTOMAP function is used to assign the input data of the devices specified in the scan list to the process
image of the DeviceNet master/scanner.
In our example this is how the assignment indicated in “Figure 133” results.
For example the input process values of the device with address 3 are assigned to the internal addresses of the
scanner as follows:
Actual position I:1.1
Nominal position I:1.2
Error I:1.3
If the actual position of the device with address 3 is to be read from a control program, this is done by accessing I:1.1.
Figure 133: Screenshot - DeviceNet - Setting up process image
english
Type 8792, 8793