Burkert Type 8793 - Manual (Page 65)

65
Operation
17.2. Function of the keys
The functions of the 4 operating keys differ depending on the operating state (AUTOMATIC or MANUAL) and
operating level (process level or setting level).
The key function which is active is displayed in the gray text field which is above the key.
The description of the operating levels and operating states can be found in
Chapter "16. Operating levels" and "18. Operating states".
Key.function.on.the.process.level:
Key
Key.function Description.of.the.function Operating.state.
Arrow key OPN (OPEN) Manual opening of the actuator. MANUAL
Change the displayed value
(e.g.
POS-CMD-TEMP-...).
AUTOMATIC
Arrow key CLS (CLOSE) Manual closing of the actuator. MANUAL
Change the displayed value
(e.g.
POS-CMD-TEMP-...).
AUTOMATIC
Left
selection key MENU Change to the setting level.
Note: Press key for approx. 3 s.
AUTOMATIC or
MANUAL
Right
selection key AUTO Return to AUTOMATIC operating state.
MANUAL
MANUAL
Change to MANUAL operating state.
AUTOMATIC
Key.function.on.the.setting.level:
Key
Key.function Description.of.the.function
Arrow key Scroll up in the menus.
+ Increase numerical values.
Arrow key Scroll down in the menus.
– Decrease numerical values.
< – Change by one digit to the left; when entering numerical values.
Left
selection key EXIT (BACK) Return to the process level.
Gradually return from a submenu option.
ESC Leave a menu.
STOP Stop a sequence.
Right
selection key ENTER
SELEC
OK
INPUT
Select, activate or deactivate a menu option.
EXIT (BACK) Gradually return from a submenu option.
RUN Start a sequence.
STOP Stop a sequence.
Table 23: Function of the keys
English
Type 8792, 8793