00 thu, Input, X.tune – Burkert Type 8793 User Manual
Page 68: P.tune, P.lin, Cmd pos, Sp pv

68
Operation
Possible.displays.in.AUTOMATIC.operating.state
MENU
HOLD
CMD / POS (t)
Graphical display of
POS and CMD with time axis
MENU
INPUT X.TUNE
INPUT
12:00
00
Thu....01...09...11
CLOCK
Time, weekday and date
MENU
CMD/POS
CLOCK
INPUT
4.0
mA
Input signal for set-point position
(0 ... 5/10 V or 0/4 ... 20 mA)
Only.for.operation.as.position.controller..
MENU
CLOCK
CMD/POS
RUN
X.TUNE
Automatic adjustment of the position controller
MENU
X.TUNE
P.LIN
RUN
P.TUNE
Automatic optimization of the process controller parameters
Only.for.type.8793
MENU
P.TUNE
CMD/POS
RUN
P.LIN
Automatic linearization of the process characteristics
Only.for.type.8793
MENU P.LIN SP/PV MANU
0.0
CMD
POS
0.0
Simultaneous display of the set-point position and the actual position
of the valve actuator
(0 ... 100 %)
MENU
CMD/POS
POS MANU
0.0
SP
PV
0.0
m3/min
m3/min
Simultaneous display of the set-point position and the actual position
of the valve actuator
(0 ... 100 %)
Only.for.type.8793
Table 26:
Displays of the process level in AUTOMATIC operating state
English
Type 8792, 8793