ALLIED Vision Technologies Guppy F-503 - Manual (Page 84)

Camera interfaces
GUPPY Technical Manual V7.1.0
84
Outputs
Output features are configured by software. Any signal can be placed on any
output.
The main features of output signals are described below:
Note

• This feature works with external Trigger_Mode_0 only.
Note

For a general description of the outputs and warnings see
the Hardware Installation Guide.
Signal Description
IntEna (Integration Enable) signal This signal displays the time in which exposure
was made. By using a register this output can be
delayed up to 1.05 seconds.
Fval (Frame valid) signal This feature signals readout from the sensor. This
signal Fval follows IntEna.
Busy signal This signal appears when:
• the exposure is being made or
• the sensor is being read out or
• data transmission is active.
The camera is busy.
Table 27: Output signals