Manual overview, D chapter – ALLIED Vision Technologies Guppy F-503 User Manual
Page 18
Introduction
GUPPY Technical Manual V7.1.0
18
Manual overview
This manual overview describes each chapter of this manual shortly.
•
Contacting Allied Vision Technologies
on page 9 lists AVT con-
tact data for both:
– technical information / ordering
– commercial information
•
on page 10 (this chapter) gives you the document
history, a manual overview and conventions used in this manual (styles
and symbols). Furthermore you learn how to get more information on
how to install hardware (Hardware Installation Guide), available AVT
software (incl. documentation) and where to get it.
•
on page 23 gives you a short introduction to the
GUPPY cameras with their FireWire technology. Links are provided to
data sheets and brochures on AVT website.
continued from last page
V7.1.0
[continued]
07.05.09
[continued]
[continued]
Offset of low noise binning mode changed from 0xF1000580 to
0xF10005B0 in
Table 132: Advanced register: Low noise bin-
Changed Camera In 1 signal U
in
(high) from 2 V to 2.4 V in
ure 33: GUPPY (housing): Camera I/O connector pin assignment
Corrected HUE and SATURATION in Feature control register to
Always 0 (for b/w and color cameras) on page 251 (TestTrack
Defect 605)
Calculated effective chip size for all sensors (with resolution
of Format_7 Mode_0) in Chapter
on page 29ff.
Due to discontinuation: removed Guppy F-025/029 cameras in
•
•
•
•
Video formats, modes and bandwidth
•
•
Corrected drawing in
Figure 121: Delayed integration timing
Version
Date
Remarks
Table 1: Document history