ALLIED Vision Technologies Guppy F-503 - Manual (Page 228)

Configuration of the camera
GUPPY Technical Manual V7.1.0
228
The entry with key 8D in the root directory (420h in this case) provides the
offset for the Node unique ID leaf node as follows:
420h + 000002 * 4 = 428h
The entry with key D1 in the root directory (424h in this case) provides the
offset for the unit directory as follows:
424h + 000004 * 4 = 434h
Offset 0-7 8-15 16-23 24-31
428h 00 02 CRC
Node unique ID leaf 42Ch 00 0A 47 01
430h Serial number
Table 95: Config ROM