ALLIED Vision Technologies Guppy F-503 - Manual (Page 49)

Specifications
GUPPY Technical Manual V7.1.0
49
Guppy F-146B/C
Feature Specification
Image device Type 1/2 (diag. 8 mm) progressive scan SONY IT CCD ICX267AL/AK
with HAD microlens
Effective chip size 6.5 mm x 4.8 mm
Cell size 4.65 µm x 4.65 µm
Lens mount C-Mount: 17.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical flange
back to filter distance: 9.5 mm
(see
Figure 29: Guppy C-Mount dimensions on page 71)
CS-Mount: 12.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical
flange back distance: 8 mm
(see
Figure 30: Guppy CS-Mount dimensions on page 72)
Picture size (max.) 1392 x 1040 (Format_7 Mode_0)
ADC 12 bit
Frame rates 3.75 fps; 7.5 fps; 15 fps; 30 fps
variable frame rates in Format_7 up to 17.7 fps
Gain control Manual: 0-24 dB (0.035 dB/step); auto gain (select. AOI)
Shutter speed 40 µs …67,108,864 µs (~67s); auto shutter (select. AOI)
External trigger shutter Trigger_Mode_0, Trigger_Mode_1, advanced feature:
Trigger_Mode_15 (bulk); image transfer by command; trigger delay
Look-up table One, user programmable (10 bit  8 bit); gamma (0.5)
Smart functions • AGC (auto gain control), AEC (auto exposure control), LUT
(look-up table)
only color: AWB (auto white balance)
• one configurable input, three configurable outputs
• RS-232 port (serial port, IIDC V1.31)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s
Digital interface IEEE 1394a IIDC V1.3
Power requirements DC 8 V - 36 V via IEEE 1394 cable or 8-pin HIROSE
Power consumption Less than 2 watt (@ 12 V DC)
Dimensions 48.2 mm x 30 mm x 30 mm (L x W x H); without tripod and lens
Mass 50 g (without lens)
Operating temperature + 5 °C ... + 45 °C housing temperature (without condensation)
Storage temperature - 10 °C ... + 60 °C ambient temperature (without condensation)
Regulations FCC Class B, CE, RoHS (2002/95/EC)
Table 17: Guppy F-146B/C