ALLIED Vision Technologies Guppy F-503 - Manual (Page 177)

Controlling image capture
GUPPY Technical Manual V7.1.0
177
The screenshots below illustrate the use of Trigger_Mode_15 on a register
level:
• The first line switches continuous mode off, leaving viewer in listen
mode.
• The second line prepares 830h register for external trigger and
Mode_15.
Left = continuous Middle = one-shot Right = multi-shot
The last line switches camera
back to continuous mode. Only
one image is grabbed precisely
with the first external trigger.
To repeat rewrite line three.
Toggle one-shot bit [0] of the
One_Shot register 61C so that
only one image is grabbed, based
on the first external trigger.
To repeat rewrite line three.
Toggle multi-shot bit [1] of the
One_Shot register 61C so that Ah
images are grabbed, starting
with the first external trigger.
To repeat rewrite line three.
Table 61: Description: using Trigger_Mode_15: continuous, one-shot, multi-shot
Figure 102: Using Trigger_Mode_15: continuous, one-shot, multi-shot
Note

Shutter for the images is controlled by shutter register.