ALLIED Vision Technologies Guppy F-503 - Manual (Page 35)

Specifications
GUPPY Technical Manual V7.1.0
35
Guppy F-038B/C
Feature Specification
Image device Type 1/2 (diag. 8 mm) interlaced SONY EIA/NTSC CCD ICX418ALL/
AKL with HAD microlens
Effective chip size 6.5 mm x 4.8 mm
Cell size 8.4 µm x 9.8 µm
Lens mount C-Mount: 17.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical
flange back to filter distance: 9.5 mm
(see
Figure 29: Guppy C-Mount dimensions on page 71)
CS-Mount: 12.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical
flange back distance: 8 mm
(see
Figure 30: Guppy CS-Mount dimensions on page 72)
Picture size (max.) 768 x 492 pixels (Format_7 Mode_0)
ADC 12 bit
Frame rates Variable frame rates in Format_7 from 0.15 fps up to 30 fps
Gain control Manual: 0-24 dB (0.035 dB/step); auto gain
Shutter speed 62 µs … 67,108,864 µs (~67s); auto shutter
External trigger shutter Trigger_Mode_0, Trigger_Mode_15, trigger delay
Look-up table One, user programmable (10 bit  8 bit); gamma (0.5)
Smart functions • AGC (auto gain control), AEC (auto exposure control), LUT
(look-up table)
only color: AWB (auto white balance)
• one configurable input, three configurable outputs
• RS-232 port (serial port, IIDC V1.31)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s
Digital interface IEEE 1394a IIDC V1.3, single port
Power requirements DC 8 V - 36 V via IEEE 1394 cable or 8-pin HIROSE
Power consumption Less than 2 watt (@ 12 V DC)
Dimensions 48.2 mm x 30 mm x 30 mm (L x W x H); w/o tripod and lens
Mass 50 g (without lens)
Operating temperature + 5 °C ... + 45 °C housing temperature (without condensation)
Storage temperature - 10 °C ... + 60 °C ambient temperature (without condensation)
Regulations FCC Class B, CE, RoHS (2002/95/EC)
Standard accessories • b/w: C/CS-Mount with built-in protection glass
• color: C/CS-Mount with built-in IR cut filter
Table 10: Specification Guppy F-038B/C