ALLIED Vision Technologies Guppy F-503 User Manual
Page 19
Introduction
GUPPY Technical Manual V7.1.0
19
•
on page 24 gives you information
about conformity of AVT cameras.
•
on page 26 describes the IR cut filter and suit-
able camera lenses.
•
on page 29 lists camera details and spectral sen-
sitivity diagrams for each camera type.
•
on page 63 provides CAD drawings of stan-
dard housing (copper) models and board level models, tripod adapter,
cross sections of CS-Mount and C-Mount.
•
on page 73 describes in detail the inputs/
outputs of the cameras (incl. trigger features). For a general description
of the interfaces (FireWire and I/O connector) see Hardware Installa-
tion Guide.
•
on page 98 describes in detail IIDC
conformable as well as AVT-specific camera features.
•
on page 167 describes shutter and
trigger modi, exposure time, one-shot/multi-shot/ISO_Enable features
and jitter.
•
Video formats, modes and bandwidth
on page 190 lists all avail-
able fixed and Format_7 modes (incl. color modes, frame rates, binning/
sub-sampling, AOI=area of interest).
•
How does bandwidth affect the frame rate?
some considerations on bandwidth details.
•
on page 224 lists standard and
advanced register descriptions of all camera features.
•
on page 284 explains where to get information
on firmware updates.
•
on page 285 lists the sensor position accuracy of AVT
cameras.
•
on page 286 gives you quick access to all relevant data in
this manual.