Ocean Optics OOISensors - Manual (Page 99)

6: Hardware Data Sheets and Instructions
Sterilizing
See the Sterilization table in the Oxygen Sensing Probes – General Information section of this chapter for
information on sterilizing probes with overcoats. It is the user's responsibility to validate any sterilization
method chosen.
Overcoat Specifications
Specification FOXY-AF Overcoat FOXY-AF-MG Overcoat
Response time in oxygen gas (at 1 atmosphere) 20 to 30 seconds 20 to 45 seconds
Response time in dissolved oxygen in H
2
0 30 to 50 seconds 60 to 90 seconds
Coating stability Poor in long term Very good
Resistance to chemicals (organic solvents) Very good Excellent
Coating hardness Soft-hard Hard
Tensile strength 780
Tear strength 70 ppi
Cohesive/adhesive strength 18 ppi
Cytotoxicity Non-toxic
FOXY-AL300-000-02-0207 89