Ocean Optics OOISensors - Manual (Page 17)

2: OOISensors Software
3. Click Next at the Welcome screen. The Choose Destination Location screen appears.
4. Accept the default or select another location for your software files. Click Next. The Backup
Replaced Files screen appears.
5. Select Yes or No, depending on whether you want to create backup replacement files. If you
select Yes, choose a location for these files. Then click Next. The Select Program Manager
Group screen appears.
6. Select the name of the Program Manager group to which you want to add the OOISensor icons.
Then click Next. The Start Installation dialog box appears.
7. Click Next. The Password dialog box appears. Type the password for your OOISensors software
and click OK. Passwords are located on the back of the software CD jacket. The software begins
installing.
• The MFPF dialog box appears asking you if you have MFPF hardware.
Notes
If you have an MFPF unit, refer to the MultiFrequency Phase Fluorometer Installation and
Operation Manual for more information. These instructions assume that you are installing
OOISensors to use with a spectrometer.
You can reinstall the application again later to add support for the MFPF.
9. Click No. The installation begins. A message then appears informing you that your installation is
complete.
10. Click OK, then click Finish. You have now installed OOISensors software. You must restart
your computer to use the software.
FOXY-AL300-000-02-0207 7