Ocean Optics OOISensors - Manual (Page 90)

6: Hardware Data Sheets and Instructions
FOXY-PI600 Specifications
Specification Value
Fiber core 600 µm silica
Fiber coating 25 µm polyimide
Outer diameter ~1 mm
Length 2 meters
Amount of pressure that can be
applied
300 psi
Probe temperature range
-80 ° C to 80° C (reflects range of ruthenium complex in the sol-
gel matrix)
Connector SMA 905
Response time (without overcoat) <1 second
Compensation For temperature only
Probe reconditioning Yes (FOXY-RECOV @ $100)
Re-calibration Required when probe is replaced or cleaned by autoclave
Probe lifetime 1 year
FOXY-18G/21G Needle-tipped 18/21-gauge Fiber
Optic Probes
The FOXY-18G/21G are silica-core, aluminum-jacketed, 1-meter probes with 18/21-gauge needle tip at
the ends for penetrating vial septa. The length of the needle tip is 4", while the entire length of the probe
is 1 meter. The FOXY-18G/21G is designed for use with the BIF200-VIS/NIR 200-
µm bifurcated optical
fiber assembly.
See Oxygen Sensing Probes – General Information at the beginning of this chapter for information on
cleaning and sterilizing oxygen probes.
80 FOXY-AL300-000-02-0207