Ocean Optics OOISensors - Manual (Page 14)

1: Sensors System Overview
Documentation
The Fiber Optic Sensors System contains various documentation components on paper, floppy diskette
and CD. These components include the following:
‰
Packing List
‰
Wavelength Calibration Data
‰
Software and Technical Resources CD
‰
Temperature Calibration Diskette (if requested)
Packing List
The packing list is located inside a plastic bag attached to the outside of the shipment box (the invoice is
mailed separately). The items listed on the packing slip include all of the components in the order,
including customized items installed in the spectrometer, such as the grating, detector collection lens, and
slit. The packing list also includes important information, such as the shipping and billing addresses, as
well as components on back order.
Wavelength Calibration Data
The spectrometer included with the Fiber Optic Sensors System is shipped in a silver-gray anti-static bag.
This bag also contains wavelength calibration information that is unique to your individual spectrometer.
Our spectrometer operating software simply reads these values from the spectrometer; however, this
information is provided in case, for some reason, you need to manually enter these values into the
software.
Software and Technical Resources CD
Each spectrometer order comes with Ocean Optics’ Software and Technical Resources CD. This disc
contains all Ocean Optics software and manuals for software operation, spectrometers, and spectroscopic
accessories. Documentation is provided in Portable Document Format (PDF). You need Adobe Acrobat
Reader version 6.0 or higher to view these files. Adobe Acrobat Reader is included on the CD.
With the exception of OOIBase32 Spectrometer Operating Software, all Ocean Optics software is
password protected. OOISensors Software must be purchased with your Fiber Optic Sensors System, and
the installation program is password protected. The password for the software can be found on the back of
the Software and Technical Resources CD package.
Temperature Calibration Diskette (if requested)
The Temperature Calibration Diskette can be used during temperature calibration setup. Insert the diskette
in the disk drive, and then load the data via the Multiple Temperature Calibration Screen.
4 FOXY-AL300-000-02-0207