Spectrometers, Light sources, Spectrometers light sources – Ocean Optics OOISensors User Manual
Page 79: For options)
5: Compatible Products and Accessories
Part Number
Description
FOXY-GF
Sol-gel coated glass fiber membranes (pack of 5) for testing viability of
reactive material; useful in evaluating membrane-holding probes
FOXY-SGS
1" x 1" sol-gel coated, microscope glass coverslips (pack of 5) for qualitative
feasibility testing
FOXY-SGS-M
1" x 3" sol-gel coated microscope slide for testing viability of reactive
material when used with microscopes
Spectrometers
Spectrometers and fluorometers for use with the Fiber Optic Sensors System are optimized for low light
level applications. The following spectrometers are optimized for use with the Fiber Optic Sensors
System:
Part Number
Description
MFPF100-1
Multifrequency Phase Fluorometer, single channel
MFPF100-2
Multifrequency Phase Fluorometer, dual channel
USB4000-FL
USB4000 spectrometer preconfigured for fluorescence without light source
USB4000-FL-395
USB4000 spectrometer preconfigured for fluorescence with USB-LS-395
light source
USB4000-FL-450
USB4000 spectrometer preconfigured for fluorescence with USB-LS-450
light source
Light Sources
The LS-450 Blue LED Light Sources are compact, low-cost light-emitting diodes that produce either
pulsed or continuous spectral output at 470 nm – the blue region – for fluorescence measurements. The
LS-395 is a pulsed blue LED excitation source with a 395 nm center wavelength. These light sources are
specially designed for use with the Fiber Optic Sensor System:
Part Number
Description
LS-450
Blue LED Pulsed Light Source with cable for external connection to
spectrometer
LS-395
Blue LED Pulsed Excitation Source, 395 nm center wavelength
FOXY-AL300-000-02-0207
69