Ocean Optics OOISensors - Manual (Page 18)

2: OOISensors Software
Configuring OOISensors Software
Once OOISensors is installed and the system has been rebooted, connect the spectrometer to the PC and
start the OOISensors program. Run OOISensors. If this is the first time you have opened the software, or
if the software is not configured yet, the Configure Hardware screen appears. You can also access this
screen manually by selecting Configure | Hardware from the OOISensors menu bar. See
Configure
Hardware for more information.
The first time that you run OOISensors, you will be prompted to configure the software for use with your
hardware.
The main OOISensors screen is shown below (the following example is for the spectrometer
configuration).
Configure Menu Functions
Select Configure from the menu bar to configure the hardware and software parameters for your system.
8 FOXY-AL300-000-02-0207