Hardware, Included hardware (oxygen sensor system), Included hardware (ph sensor system) – Ocean Optics OOISensors User Manual
Page 13: Software
1: Sensors System Overview
Hardware
The following hardware is included with the Fiber Optic Sensors System or is compatible with the Fiber
Optic Sensors System.
Included Hardware (Oxygen Sensor System)
Fiber optic fluorescence probe with proprietary oxygen-sensing thin-film coating on the tip
Miniature fiber optic spectrometer
LS-450 Blue LED Light Source
Bifurcated optical fiber assembly with splice bushing that connects the fluorescence probe to the
spectrometer and the LED
A/D Converter (if needed)
Included Hardware (pH Sensor System)
pH probe & film
Light Source (such as LS-1 or Mini-D2T)
Miniature fiber optic spectrometer (see
A/D Converter (if needed)
See
Compatible Products and Accessories
for information on these and other Ocean Optics products
designed for use with the Fiber Optic Sensor System.
Caution
Do not connect the spectrometer included with the Fiber Optics Sensors System to the PC
prior to installing the OOISensors software. Connecting this equipment prior to software
installation will result in incorrect driver configuration and may require Technical Support
to correct. See
Software
OOISensors software is Ocean Optics’ next generation of software for use with the Fiber Optics Sensor
System. OOISensors is an advanced data acquisition and display program that provides a real-time
interface to a variety of signal processing functions for users of Windows 95/98/ME/NT/2000/XP.
MFPF software is used with OOISensors when you have an MFPF unit. See
for more information on the MFPF.
FOXY-AL300-000-02-0207
3