Ocean Optics OOISensors - Manual (Page 39)

2: OOISensors Software
► Procedure
To save the Temperature Chart without displaying the chart:
1. Select Configure from the OOISensors menu bar.
2. Select Spectrometer from the pop-up menu.
3. Click on the Sensors tab and enable the Chart function, located under the Temperature
Measurement option. Temperature data will be collected, whether or not the Temperature Chart is
displayed.
4. Save the chart using the Save function.
Time Chart
The time chart displays the data from all active channels at a specific wavelength over time.
► Procedure
Perform the following steps to view the Time Chart:
1. Select Configure | Spectrometer from the menu bar.
2. Click on the Display tab.
3. Ensure that Spectral Graph & Time is selected next to Graph and Chart Display mode.
To configure a timed data acquisition procedure, select Configure | Spectrometer from the menu bar and
click on the Timing tab.
Time Chart Switch
The Time Chart switch allows you to start and stop data acquisition. Click on the switch to enable or
disable data acquisition.
► Procedure
To set timed data acquisition parameters:
1. Select Configure | Spectrometer from the menu bar.
2. Click on the Timing tab.
3. Enter the data acquisition parameters.
FOXY-AL300-000-02-0207 29