Ocean Optics OOISensors - Manual (Page 89)

6: Hardware Data Sheets and Instructions
Specification Value
Maximum applied pressure 300 psi
Probe temperature range
-80 ° C to 80° C (reflects range of ruthenium complex in the sol-
gel matrix)
Connector SMA 905
Response time (without overcoat) <1 second
Compensation Temperature compensation only
Probe reconditioning Yes (FOXY-RECOV @ $100)
Re-calibration Required when probe is replaced or cleaned by autoclave
Probe lifetime 1 year
FOXY-PI600 Polyimide coated Fiber Optic Probe
The FOXY-PI600 is a 600-µm polyimide-coated fiber optic probe. The polyimide is a coating designed to
operate at temperatures up to 300°C. The polyimide coating allows the sensor to operate in many harsh
chemicals and solvents. The FOXY-PI600 is 2 meters in length and is designed for use with the BIF400-
VIS/NIR 400-µm bifurcated optical fiber assembly.
See Oxygen Sensing Probes – General Information at the beginning of this chapter for information on
cleaning and sterilizing oxygen probes.
FOXY-PI600 Polyimide Coated Fiber Optic Probe
FOXY-AL300-000-02-0207 79