Ocean Optics OOISensors - Manual (Page 81)

Chapter 6
Hardware Datasheets and
Instructions
The following section contains product data and operating instructions for hardware that is specific to
Ocean Optics’ Fiber Optic Sensor System.
Overview
The following products are detailed in this chapter:
• Fiber Optic Sensing Probes – General Information
• FOXY-R Stainless-steel 1/16" OD Fiber Optic Probe
• FOXY-AL300 Aluminum-jacketed Fiber Optic Probe
• FOXY-PI600 Polyimide coated Fiber Optic Probe
• FOXY-18G/21G Needle-tipped 18/21-gauge Fiber Optic Probes
• FOXY-OR125 and FOXY-OR125G O-ring Fiber Optic Probes
• FOXY-T1000 Stainless-steel Fiber Optic Probe with Light Shield
• FOXY-T1000-RTD Stainless-steel Fiber Optic Probe with Light Shield
• FOXY-RESP Respiration Probe
Oxygen Sensing Probes – General Information
The following general information applies to all of oxygen probes detailed in the following sections.
FOXY-AL300-000-02-0207 71