Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 94)

94
Chapter 3 Menu Overview
Menu Overview
QUICK
SETUP
Set the basic
menus needed to
configure the
printer.
VALIDATOR
2
Online data
validator setup
and status
reporting.
CONFIG.
CONTROL
Name, store, and
retrieve up to
eight custom
printer
configurations.
MEDIA
CONTROL
Control various
parameters
related to print
quality, media,
and ribbon.
CALIBRATE
CTRL
Select the correct
media sensing
for the media
type installed and
perform media
sensor
calibration.
PRINTER
CONTROL
Select the
desired Active
IGP emulation,
other emulations,
and various
printer operating
parameters. Emulations
selected from the
PRINTER
CONTROL menu
appear here.
These
emulations relate
to graphics
languages,
particular
printers, and
optional host
interface
protocols.
DIAGNOSTICS
Select various
printer tests,
monitor and
record printer
performance.
PARALLEL
PORT
Select various
parallel port
related
parameters.
Press to select the next main menu.
Press ↓ or ↑ to move within each main menu.
..
.
OPTIONAL
PORTS
Select optional
host interfaces.
OPTIONAL
FEATURES
Select optional
features, such as
Battery Control.
SELECTED
EMULATIONS
NOTES:
1
This menu appears only if an RFID encoder is installed.
See the RFID Labeling Reference Manual.
2 This menu appears only if a Validator is installed. See
the
Online Data Validator User’s Manual.
SERIAL
PORT
Select various
serial port related
parameters.
RFID
CONTROL 1
RFID encoder
setup and status
reporting.
PRINTER
MGMT
Select PNE port
type and port
number.
USB
PORT
Selects various
USB port related
parameters.