Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 349)

Media Cutter Option
349
Media Cutter Option
Cutters are designed to cut tags and label liner. Avoid cutting through the
adhesive backed portion of any media.
Cutter
The cutter is designed to cut tags and label liner.
Host Interfaces
Table 24. 4, 6, and 8 inch Models
Typical Life > 1,000,000 cuts
Warranty 500,000 cuts
Environment Same specifications as printer
Cutting Method Rotating single-edged blade
Media Thickness Range 0.0025 to 0.010 in. (0.064 to 0.254 mm)
Media Width Range Same range as printer
Media Length Range 1.00 to 99 in. (25.4 to 2515 mm)
Table 25. Host Interface Characteristics
1. Serial RS-232 or RS-422 at 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, or 115200 baud.
2. Parallel (Centronics compatible) or IEEE 1284 bi-directional.
3. USB 2.0
The RS-232 and optional RS-422 host interfaces shall have the following
characteristics:
Word Length: Selectable 7-bit or 8-bit data format
Handshaking: XON/XOFF (in receive mode only) and
CTS/DTR
Input Buffer: Selectable from 1k through 16 kbytes. XOFF is
transmitted and DTR goes low when buffer is
equal to or less than 25% of full. XON is
transmitted and DTR goes high when buffer is
25% above empty. Characters are transmitted
with no parity from the printer