Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 193)

Emulation Submenus
193
Emulation Submenus
NOTE: The following descriptions are grouped together for all emulations
and are listed in alphabetical order. The emulations do not include
PPI/ZGL, PPI/TGL, PPI/IGL, PPI/STGL, PPI/DGL, PPI/MGL, and
PPI/IEGL. See individual Programmer’s Reference Manuals for more
information.
^Dnn Dot Slew
• Low Resolution. Sets the dot slew command dot values to be interpreted
as 60 dpi P-Series dots.
• High Resolution. Sets the dot slew command dot values to be
interpreted as print engine dots.
The factory default is Low Resolution.
20 CPI Condensed
Compressed print characters are narrower than the normal character set.
This is helpful for applications where you need to print the maximum amount
of information on a page.
• Enable. Prints about 60% of the width of normal characters when
compressed print is chosen by the host computer.
• Disable. Does not compress print widths, even if condensed print is
chosen by the host.
The factory default is Enable.
5225 World Trade
The 5225 emulation has a standard multinational character set that serves as
a base and 14 extended world trade character set assortments.
The options are Standard Char (the factory default) and Extended Char.
Absorb After ^PN
• Disable. The paper motion line terminators that immediately follow the
^PN command are sent to the printer and processed.
• Enable. The paper motion line terminators that immediately follow the
^PN command are ignored.
The factory default is Disable.