Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 271)

KERBEROS PARAMS Submenus
271
Tckt Life (SEC)
Sets the maximum allowable amount of time in Seconds (SEC), Minutes
(MIN), Hours (HR), or Days (DAY), as specified by the Tckt Life Units, that a
ticket obtained from the Kerberos server is valid before getting a new one.
• Seconds: The range is 300-259200, and the default is 43200.
• Minutes: The range is 5-4320, and the default is 720.
• Hours: The range is 1-72, and the default is 12.
• Days: The range is 1-3, and the default is 1.
NOTE: Whatever submenu is selected in Tckt Life Units will display on the
Tckt Life (SEC) menu. For example, if you select Hours, the Tckt Life
(SEC) menu name will change to Tckt Life (HR).
Renew Life Units
Renew lifetime unit in Seconds, Minutes, Hours, or Days.
The factory default is Seconds.
Renew Life (SEC)
Sets the maximum allowable amount of time in Seconds (SEC), Minutes
(MIN), Hours (HR) or Days (DAY), as specified by the Renew Life Units,
before warning that a new Kerberos password is needed.
• Seconds: The range is 0-604800, and the default is 0.
• Minutes: The range is 0-10080, and the default is 0.
• Hours: The range is 0-168, and the default is 0.
• Days: The range is 0-7, and the default is 0.
NOTE: Whatever submenu is selected in Renew Life Units will display on the
Renew Life (SEC) menu. For example, if you select Days, the Renew
Life (SEC) menu name will change to Renew Life (DAY).