Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 209)

Emulation Submenus
209
Emulation
This item allows you to select the desired IPDS emulation, either 4028 IPDS
or 3816 IPDS.
The factory default is 4028 IPDS.
Epson Set
This item allows you to select the Epson character subset used by the printer.
The options are listed on page 199.
The factory default is ASCII (USA).
ESC d command
This item is for backward compatibility.
• Even dot plot. This option interprets the ESC d command as even dot
plot.
• Double high. This option interprets the ESC d command as double high.
Select this option for backward compatibility.
The factory default is Even dot plot.
EVFU Select
Controls how the printer handles vertical formatting.
• Enable. Selects P-Series compatible Electronic Vertical Format Unit
(EVFU).
• Disable. Disables all EVFU processing.
The factory default is Enable.
Expanded Font (PGL)
Expanded font allows you to print characters in different sizes with specified
parameters and to select which font face to use.
• Scalable. Uses scalable fonts.
• Block. Uses block fonts.
• Alt Block 1. Uses alternative block fonts with a different character set.
The factory default is Scalable.
Expanded Font (VGL)
Expanded font allows you to print characters in different sizes with specified
parameters and allows you to select block or non-block font face.
• Scalable. Uses Gothic font as default. Other font faces can be selected
by using the IFONT command.
• Block. Uses Block font.
The factory default is Scalable.