Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 228)

228
Chapter 3
Set Text Orientn (Coax, Twinax)
Specifies the direction in which characters are printed on the page. This
allows the printer to print languages which are printed right to left instead of
left to right.
• Control By Host (the default). Allows printers configured as a 4234 to
use the “Set Text Orientation” command from the host.
• Left to Right.
• Right to Left. When you select a right to left language, the host will be
notified of print direction changes when the printer is put online.
Set Text Orientn (TN3270, TN5250)
Specifies the direction in which characters are printed on the page. This
allows the printer to print languages which are printed right to left instead of
left to right.
• Left to Right (the default).
• Right to Left. When you select a right to left language, the host will be
notified of print direction changes when the printer is put online.
Select SFCC (IGP/VGL)
This option selects the Special Function Control Code. The default value is
the caret ^ (decimal 94). Valid values are 17 through 255. Run a configuration
printout to determine the currently selected SFCC.
The range is 17-255, and the factory default is 94.
SFCC Char (SPC Coax, SPC Twinax)
Determines what character is printed when an EBCDIC Logical Not character
¬ (Hex 5F) is received from the host.
• User Defined* (the default)
• Set 1 <%>
• Set 2 ^^$
• Set 3 _%_
SFCC d command
This menu option is for backward compatibility.
• Even dot plot (the default). This option interprets the SFCC d command
as even dot plot.
• Double high. This option interprets the SFCC d command as double
high. Select this option for backward compatibility.