Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 205)

Emulation Submenus
205
Compressed Print
Controls which host command sets compressed printing.
• Char 01 SOH
• Char 03 ETX
• Char 09 HT
The factory default is Char 01 SOH.
Control Code 06
Control Code 06 defines the function of ASCII code 06 hex (ACK). You can
select an alternate line spacing of 6.0, 8.0, or 10.3 LPI.
The options factory default is 8.0 LPI.
Control Code 08
Control Code 08 defines the function of ASCII code 08 hex (BS). You can
define the code to output an Elongated character or a Backspace. The factory
default is Elongated.
Copy Count
Determines the number of identical copies of each physical page that will be
printed.
The range is 1-999, and the factory default is 1.
CR at MPP+1
MPP is Maximum Print Position, which is also known as line length. This
option controls a carriage return at the end of a print line and at MPP+1.
• On. Produces a carriage return to the first print position of the next line.
• Off. Produces a carriage return to the first print position of the current line.
The factory default is On.
CR Edit
This parameter determines if a carriage return will be followed by a line feed.
• Disable. The printer ignores all carriage returns that are not followed by
line feeds.
• Enable. The printer processes all carriage returns, even for those that are
not followed by line feeds.
The factory default is Disable.