Printronix SL5000r RFID Smart Label and Thermal Printers User Manual

Page 92

Text mode
Original mode

Chapter

Overview

Before saving the modified configuration, you must delete the original
configuration if the Protect Configs. option is enabled.

Press the

↑ or ↓

key until the following message displays:

Press the

−

key to cycle through the options (1-8). When the

desired number displays, press the

↵ key to select it. The following

message displays:

Then, the following displays when it is deleted:

Save the new configuration as described in the “Saving A Configuration”
on page 88. Make sure you select the same number (e.g., Config. 1)
when saving the modified configuration. The new configuration writes
over the existing one.

Print a copy of this newest configuration and store it in a safe place. Refer
to “Printing A Configuration” on page 93.

Delete Config.
1*

Deleting
Configuration

Delete Config.
X*