Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 221)

Emulation Submenus
221
NL at MPP+1
Specifies the linespacing action when the printline exceeds the rightmost print
position and text continues from the leftmost print position on a new line.
• On (the default). Moves to the first print position two lines down from the
current position.
• Off. Moves to the first print position of the next print line.
Null Handling
This item allows the printer to either treat nulls as blank spaces or ignore
them. If nulls are ignored, the print position does not move.
• Space (the default). Treats nulls as spaces.
• Ignore. Ignores nulls.
Null Suppression (Coax, TN3270)
This item allows the printer to either treat nulls as blank spaces or ignore
them. If nulls are ignored, the print position does not move.
• Off (the default). Ignores nulls.
• On. Treats nulls as spaces.
Null Suppression (IPDS)
• Disable (the default). When disabled, an exception is generated when the
IPDS data stream contains an 0x00.
• Enable. When enabled, this option ignores the EBCDIC value 0x00 in the
IPDS data stream.
Optimized Ratio
This option selects different bar code ratios for certain bar codes including
Code 39 and Interleaved 2 of 5. It is included for compatibility with the IGP-
X00 printers.
• Disable (the default). Use standard bar code ratios.
• Enable. Select the alternate bar code ratios.
Overstrike
Overstrike determines the action required when a line is printed over a
previous line because a carriage return was received without a line feed.
• Enable (the default). Prints the second line on top of the first line.
• Disable. Replaces the characters from the first line with the second line.