Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 195)

Emulation Submenus
195
Alt. Set 80-9F (Coax, Twinax, TN3270, TN5250)
• Printable. Prints data in the range of hex 80 through hex 9F.
• Control Code. Interprets data in the range of hex 80 through hex 9F as a
control code.
The factory default is Printable.
Append Rotated
• Disable. Logos and alphanumeric strings are treated as separate
elements.
• Enable. Appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation.
The factory default is Disable.
Auto FF at ^PN
When enabled, an FF will be generated automatically to slew to the end of
form when the ^PN command is encountered and when the current vertical
position is not at the top-of-form.
The options are Disable (the factory default) and Enable.
Auto LF (P-Series, P-Series XQ)
This option defines the printer action when print data is received past the
forms width setting.
• Disable. Discards any data past the forms width.
• Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
The factory default is Disable.
Auto LF (Serial Matrix, Proprinter XL, Epson FX)
This option defines the printer action when print data is received past the
forms width setting.
• Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
• Disable. Discards any data past the forms width.
The factory default is Enable.