beautypg.com

Printronix SL5000r RFID Smart Label and Thermal Printers User Manual

Page 62

background image

62

Chapter

2

Using The Optional Internal Rewinder

12. Press down on both sides of the pivoting deck and rotate the deck lock

lever fully counterclockwise.

13. Press the FEED key. The label advances to the peel-off position, and

“Remove Label” displays on the LCD.

14. Manually remove the peeled label from the printer.

15. Press the PAUSE key until “ONLINE” displays.

16. Close the media cover.

IMPORTANT

The rewinder supports a maximum diameter of 5 inches of liner.
Exceeding this diameter can cause the liner to rub on the bottom pan.
The rewinder is designed to support the full amount of liner from a
standard 8 inch diameter media roll.

Deck Lock
Lever

Media Cover