Saving a configuration – Printronix SL5000r RFID Smart Label and Thermal Printers User Manual

Page 88

Chapter

Overview

When the desired submenu displays, press the

− key to scroll

through the values or options.

Press the

↵ key to select a value. An asterisk (*) displays next to the

selected value or option.

If there are more submenu values or options you want to change, use the

,↑, ↓, +, and − keys to access the value and the ↵ key to select it. At

any time, you may press the

key to return to the Main menu.

At any time, you may press the PAUSE key twice to exit the Configuration
menu and place the printer online. Once you have finished selecting all
your options, save your configuration.

IMPORTANT

If you do not save your configuration, all your new values will be lost
when you power off the printer.

Saving A Configuration

You can save up to eight different configurations to meet eight unique print job
requirements. These configurations are saved and stored in the printer and
are not lost when the printer is turned off.

NOTE: If the Protect Configs. option is enabled, the new configuration will not

be saved until the existing configuration is deleted.

Follow these steps to save a new configuration:

Press the

key until the following message displays:

Press the

↓ key until the following message displays:

Press the

−

key to cycle through the options (1-8). Note that “Factory”

is not listed, because no changes made to the factory configuration can
be saved under Factory.

When the desired number displays, press the

↵ key to select it. The

following message displays briefly:

When processing is completed, the display shows:

MENU MODE
CONFIG. CONTROL

Save Config.
1*

Saving
Configuration

Save Config.
X*