Wlan params submenus, Signal strength, Operation mode – Printronix SL5000r RFID Smart Label and Thermal Printers User Manual
Page 265
WLAN PARAMS Submenus
265
WLAN PARAMS Submenus
Signal Strength
This menu displays the strength of the wireless signal.
NOTE: This is a display value only and cannot be changed.
Operation Mode
Allows you to select the way the Wireless option communicates:
•
Infrastructure (the default). The Wireless option must go through an
Access Point.
•
Pseudo IBSS. Proprietary, peer-to-peer communication (without an
Access Point). The two peers must be specific to one manufacturer.
•
Ad Hoc. Standard, peer-to-peer communication (without an Access
Point). The two peers can be from different manufacturers.
WLAN
PARAMS
(from page 264)
Notes:
* = Factory Default
3
A 1-32 character, case-sensitive string. Characters can be
alphanumeric, symbols, or spaces.
4
This menu appears only if “WEP Key 1 Width” is set to 128 Bits.
6
This menu appears only if a Symbol LA5127 RF card is installed.
WEP Key 4
BYTE5:
WEP Key 4
4
BYTE6:
WEP Key 4
4
BYTE7:
WEP Key 4
4
BYTE8:
WEP Key 4
4
BYTE9:
WEP Key 4
4
BYTE10:
WEP Key 4
4
BYTE11:
WEP Key 4
4
BYTE12:
WEP Key 4
4
BYTE13:
Reset WEP
Keys
WPA
Mode
6
Disable*
Enable
WPA
Cipher
6
TKIP*
AES
TKIP+AES
WPA
P-Phs (01-15)
6
XXX
3
WPA P-Phs
(16-30)
6
WPA P-Phs
(31-32)
6
Reset WPA
P-Phs
6
Default WEP
Key
0*
1-4