Emulations, Overview – Printronix SL5000r RFID Smart Label and Thermal Printers User Manual
Page 160
160
Chapter
3
EMULATIONS
EMULATIONS
Overview
This section covers the following emulations:
•
Coax (page 164)
•
Twinax (page 167)
•
SPC Coax (page 169)
•
SPC Twinax (page 170)
•
•
TN3270 (page 175)
•
TN5250 (page 177)
•
IGP/PGL (page 179)
•
IGP/VGL (page 181)
•
PPI/ZGL (Refer to the
Printer Protocol Interpreter (PPI) ZGL
Programmer’s Reference Manual.)
•
PPI/TGL (Refer to the
Printer Protocol Interpreter (PPI) TGL
Programmer’s Reference Manual.)
•
PPI/IGL (Refer to the
Printer Protocol Interpreter (PPI) IGL Programmer’s
Reference Manual.)
•
PPI/STGL (Refer to the
Printer Protocol Interpreter (PPI) STGL
Programmer’s Reference Manual.)
•
PPI/DGL (Refer to the
Printer Protocol Interpreter (PPI) DGL
Programmer’s Reference Manual.)
•
PPI/MGL (Refer to the
Printer Protocol Interpreter (PPI) MGL
Programmer’s Reference Manual.)
•
PPI/IEGL (Refer to the
Printer Protocol Interpreter (PPI) IEGL
Programmer’s Reference Manual.)
•
P-Series (page 183)
•
P-Series XQ (page 185)
•
Serial Matrix (page 187)
•
Proprinter XL (page 189)
•
Epson FX (page 191)
You can select emulation default parameters directly from the control panel, or
by control codes as explained in the appropriate Programmer's Reference
Manual.
IMPORTANT
BEFORE you reconfigure an emulation, print a configuration sheet to
see all current settings.