Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 89)

Auto Save Configuration
89
NOTE: If the configuration number has been previously saved and Protect
Configs. = Enabled under CONFIG CONTROL, the following error
message displays:
If the above occurs, see “Modifying A Saved Configuration” on page 91,
step 4.
5. Print your configuration and store it in a safe place for future reference.
Refer to “Printing A Configuration” on page 93.
Auto Save Configuration
If you make any changes to the factory default configuration menu items, you
will be prompted to save the changes to “Config #” when you place the printer
online. “#” equals the next available unassigned configuration number. When
prompted, press one of the following keys:
• Enter. Saves to Config 1 or the next available Config, and becomes the
Power-Up config.
NOTE: If all eight Configs are assigned, you will be prompted to select which
Config to overwrite.
• Pause. Changes will be implemented but saved only temporarily until
deliberately saved as a new configuration or until you power off the
printer. All changes will be lost when you power off the printer.
CONFIG. EXISTS
Delete First