EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual - Manual (Page 91)

Selection of an Audio Channel
The left and the right loudspeaker buttons of an audio stereo track are used to
select or remove respectively the left or the right channel of the corresponding audio track:
Clicking the left audio button will remove the left audio component from the source so that
the clip made has no left audio channel. In this case, the right channel will be output on the
left and right channels.
Clicking both left and right audio buttons will also remove the right audio component so
that the clip made has no audio channel for this track.
A mono track is removed from the selection by clicking the loudspeaker button on the right
of the radio button:
A 5.1 audio track is removed from the selection by clicking the loudspeaker button on the
right of the radio button:
The next table summarizes how the buttons look like depending on the selection:
Selected Removed
Video
Audio
Selection of the Track for Audio Monitoring
When you create a clip to be placed on a timeline, you need to select the audio track that
will be monitored when playing the loaded clip.
USER MANUAL Xedio 4.35 Xedio CleanEdit
6. Main Workspace for Editing 75