EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual - Manual (Page 121)

Setting the Number and Type of Audio Output Tracks
The number and type of the audio output tracks is set from the Output Channels area.
1. Select the number of 5.1 tracks, stereo tracks and/or mono tracks.
If the resulting number of audio channels exceed 16, you will not be able to apply the
selection.
2. Click Apply.
The selection will be reflected under the Recorder Video Display as soon as the
OK button will be clicked.
Setting the Routing between Timeline Tracks and Output Tracks
The routing from timeline tracks to output tracks is set from the Output Matrix area.
The timeline tracks are represented on the left, with their audio type as this has been set
through the contextual menu each Audio Track button (mono, stereo or 5.1).
The output tracks are represented on the top of the matrix, with their audio type as this has
been set through the Output Channels area.
To select the output track from which a timeline track will be played, click on an
intersection in the grid.
Each selection is represented by a colored bullet.
Two cases can occur.
• Both the timeline track and the output track have the same audio type. This is
represented with .
Clicking the bullet remove it and thus clear the routing defined.
• The timeline track and the output track do not have the same audio type.
a. This is represented with when the bullet is not selected.
b. This is represented with when the bullet is selected (by clicking a non selected
bullet). The audio conversion rule can therefore be established.
Clicking once a selected bullet, or twice a non selected bullet, remove it and thus clear
the routing defined.
Setting the Audio Conversion Rule
When the timeline track is routed to an output track with a different audio type, a
conversion rule must be set from the Audio Conversion Rule area.
• If the number of output channels is smaller than the number of timeline channels (5.1
to stereo or mono, stereo to mono), you will have to choose one of the conversion
rules as follows:
USER MANUAL Xedio 4.35 Xedio CleanEdit
6. Main Workspace for Editing 105