EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual - Manual (Page 158)

2. Click the Roll Clip button:
The first frame of the clip is loaded onto the Player.
The last frame of the clip is loaded onto the Recorder.
The counters are initialized to 0.
3. Click the Roll Clip button as many times as the number of frames you want to roll the
clip.
The upper counter specifies the number of frames the IN point of the clip will be
shifted to the left (negative value) or to the right (positive value).
The lower counter specifies the number of frames the OUT point of the clip will be
shifted to the left (positive value) or to the right (negative value).
4. Once the roll action has been defined, you can
◦ confirm the action by clicking
◦ reinitialize the operation by clicking
When you confirm the action, it is applied to the clip, the counter information disappears.
Note
Please refer to the keyboard shortcuts reference chart appended to this user
manual for detailed assignments.
7.11.5. Retrieving the Source of an Edited Image
The images of the edit are previewed in the Recorder area. You can use the Match Frame
button accessible in the Trim area to display the source of one of those images in the
Player, and to have the entire corresponding original media available.
To retrieve the source of an edited image, proceed as follows:
1. Display the desired image in the Recorder area.
2. Click the Match Frame button in the Trim area or press the Backspace keyboard key.
142 7. General Editing
EVS Broadcast Equipment SA Issue 4.35.B - August 2013